Static Charge Eliminator; Preparation For Removing The Stack Delivery Roller Upper Static Charge Eliminator; Remove The Stack Delivery Roller Upper Static Charge Eliminator; Preparation For Removing The Stack Delivery Roller Lower Static Charge Eliminator - Canon Saddle Finisher-AF2 Service Manual

Chapter 4
[1]
[2]

4.5.3 Static Charge Eliminator

4.5.3.1 Preparation for Removing the Stack Delivery
Roller Upper Static Charge Eliminator
1) Remove the stack wall (upper). (page 4-8)Reference[Removing the
Stack Wall (Upper)]
4.5.3.2 Remove the Stack Delivery Roller Upper Static
Charge Eliminator
1) Remove 2 stack delivery roller upper static charge eliminators [1].
- 4 screws [2]
[2] [1]
4.5.3.3 Preparation for Removing the Stack Delivery
Roller Lower Static Charge Eliminator
1) Remove the stack wall (upper). (page 4-8)Reference[Removing the
Stack Wall (Upper)]
2) Remove the stack wall (lower). (page 4-8)Reference[Removing the
Stack Wall (Lower)]
4-42
F-4-189
[2] [1] [2]
[2]
F-4-190
4.5.3.4 Removing the Stack Delivery Roller Lower Static
Charge Eliminator
1) Reverse the stack wall (lower), and remover the stack delivery roller lower

static charge eliminator [1].

- 2 claws [2]
[2]
0020-8802
0020-8803
4.5.3.5 Preparation for Removing Saddle Inlet Static
Charge Eliminator
1) Pull out the saddle unit. (service position) (page 4-32)Reference[Pull
Out the Saddle Unit (Service Position)]
4.5.3.6 Removing the Saddle Inlet Static Charge
Eliminator
1) Remove the plate [1].
- 2 screws [2]
[2]
2) Remove the saddle inlet static charge eliminator [1].
0021-4896
- 2 screws [2]
[1]
[2]
F-4-191
[1]
F-4-192
0021-4899
0020-8804
0020-8806