Table of Contents
Advertisement
2.8.4 Adding the Pressure
of the Cassette Separation
Roller
CLC5100 / CLC4000
If double feeding or pickup failure occurs during
pickup operation, change the position of the pressure
spring [2] of the separation roller [1]:
a. If double feeding occurs, move the hook of the
spring in the direction of [A].
b. If pickup failure occurs, move the hook of the
spring in the direction of [B].
[2]
F-2-54
2.8.5
Adjusting
Position
Multifeeder
Roller
Solenoid (SL5)
CLC5100 / CLC4000
Install the solenoid so that the distance between the
solenoid arm [2] and the rear side plate [3] is 3.5 ±0.2
mm when the plunger of the solenoid [1] is pushed in.
0002-4831
[1]
the
of
the
Pick Up
Releasing
0002-4837
rear
[2]
3.5 0.2mm
[3]
F-2-55
2.8.6
Adjusting
Position of the Delivery
Paper Deflecting Plate
Solenoid (SL14)
CLC5100 / CLC4000
1) Place the delivery assembly upright on a flat
surface.
2) Fix the solenoid in position where the arm [2] hits
the stepped screw [3] and stops with the arm lifted
and the plunger of the solenoid [1] pushed in.
rear
[1]
[2]
F-2-56
Chapter 2
[1]
the
0002-4849
[3]
2-39
Advertisement
Table of Contents
