Positioning The Pick-Up Roller; Releasing Solenoid Of The Cassette; Adjusting The Registration For The Cassette - Canon NP6260 Service Manual

9. Positioning the

Releasing Solenoid of the Cassette

As shown in Figure 5-846, adjust the
position of the solenoid so that the
distance from the bottom of the pick-up
assembly and the section A of the roller
arm is 36 ±0.5 mm. (Use two screws
.)
10. Adjusting the Registration for the
Cassette
Loosen the screw
Figure 5-847 using a screwdriver
and adjust the position of the cassette
hook plate so that the registration is
as specified.
In the case of cassette 4, be sure to
enter the paper width basic value (*4*)
after making the adjustment.
COPYRIGHT © 1997 CANON INC.
Pick-Up Roller
shown in
,
CANON NP6560/NP6360/NP6260 REV. 0 NOV. 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
A
Figure 5-846
Figure 5-847
10±1.5mm
0
2
4
6
8
10
Figure 5-848
5-83