Debug Platform Led - Cisco IE-3000-8TC Command Reference Manual

Appendix B IE 3000 Switch Debug Commands

debug platform led

Use the debug platform led privileged EXEC command to enable debugging of light-emitting diode
(LED) actions. Use the no form of this command to disable debugging.
Syntax Description
generic
signal
Though visible in the command-line help strings, the stack keyword is not supported.
Note
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines The undebug platform led command is the same as the no debug platform led command.
Related Commands Command
show debugging
OL-13019-01
debug platform led {generic | signal}
no debug platform led {generic | signal}
Display LED generic action debug messages.
Display LED signal bit map debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Cisco IE 3000 Switch Command Reference
debug platform led
B-35