Cisco IE-3000-8TC Command Reference Manual page 323

Chapter 2 IE 3000 Switch Cisco IOS Commands
Examples This example shows how to assign DSCP 10 to all FTP traffic without any policers:
Switch(config)# policy-map policy_ftp
Switch(config-pmap)# class ftp_class
Switch(config-pmap-c)# set dscp 10
Switch(config-pmap)# exit
You can verify your settings by entering the show policy-map privileged EXEC command.
Related Commands Command
class
police
policy-map
show policy-map
trust
OL-13019-01
Description
Defines a traffic classification match criteria (through the police, set, and trust
policy-map class configuration commands) for the specified class-map name.
Defines a policer for classified traffic.
Creates or modifies a policy map that can be attached to multiple ports to
specify a service policy.
Displays QoS policy maps.
Defines a trust state for traffic classified through the class policy-map
configuration command or the class-map global configuration command.
Cisco IE 3000 Switch Command Reference
set
2-297