Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Cisco IE-3010-16S-8PC
Summary of Contents for Cisco IE-3010-16S-8PC
- Page 1 Cisco IE 3010 Switch Hardware Installation Guide August 2011 Americas Headquarters Cisco Systems, Inc. 170 West Tasman Drive San Jose, CA 95134-1706 http://www.cisco.com Tel: 408 526-4000 800 553-NETS (6387) Fax: 408 527-0883 Text Part Number: 78-19581-01...
- Page 2 DEALING, USAGE, OR TRADE PRACTICE. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners. The use of the word partner does not imply a partnership relationship between Cisco and any other company.
-
Page 3: Table Of Contents
Dual-Purpose Port LEDs 1-11 SD Flash Memory Card LED 1-11 SD Flash Memory Card 1-11 Power-Supply Side 1-12 Power-Supply Side LEDs 1-13 Power Supply Features 1-14 Management Options 1-14 Network Configurations 1-14 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 4 Power-Supply Module Installation Installation Guidelines Installing a Power-Supply Module Equipment That You Need Grounding the Switch Installing the Power-Supply Module in the Switch Wiring the Power Source Removing the Power-Supply Module 3-13 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 5 Connector and Cable Specifications A P P E N D I X Connector Specifications 10/100 SFP Module Connectors Dual-Purpose Ports Alarm Port Cables and Adapters SFP Module Cables Cable Pinouts Console Port Adapter Pinouts Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 6 Installing the Cisco Microsoft Windows 2000 USB Driver Installing the Cisco Microsoft Windows Vista USB Driver Uninstalling the Cisco Microsoft Windows USB Drivers Uninstalling the Cisco Microsoft Windows XP and 2000 USB Driver Uninstalling the Cisco Microsoft Windows Vista USB Driver Entering the Initial Configuration Information...
-
Page 7: Preface
Preface This guide describes the hardware features of the Cisco Industrial Ethernet (IE) 3010 switch. It describes the physical and performance characteristics of the switch, explains how to install it, and provides troubleshooting information. This guide does not describe system messages that you might receive or how to configure your switch. -
Page 8: Related Publications
The safety warnings for this product are translated into several languages in the Regulatory Compliance and Safety Information for the Cisco IE 3010 Switch that ships with the product on the documentation CD. The EMC regulatory statements are also included in that guide. -
Page 9: Chapter 1 Product Overview
C H A P T E R Product Overview The Cisco IE 3010 switch provides a rugged and secure switching infrastructure for harsh environments. It is suitable for industrial Ethernet applications, including process manufacturing, intelligent transportation systems (ITSs), rail transportation, and other similar deployments. -
Page 10: Cable Side
30 10 flash memory card slot RJ-45 console port LEDs USB (mini-Type B) console port Express Setup button Power-input terminal 10/100 ports Alarm port Dual purpose ports 1. SD = Secure Digital Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 11: 10/100 Fast Ethernet Ports
A restricted access area can be accessed only through the use of a special tool, lock and key or other means of security. Statement 1072 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 12: Dual-Purpose Ports
IEEE 802.3af. The Cisco prestandard PoE is also supported for Cisco IP Phones and Cisco Aironet Access Points. The PoE ports on the switch deliver up to 15.4 W of PoE. Any four of the eight ports are designated as high priority PoE ports, while other four ports are designated as low priority PoE ports. -
Page 13: Sfp Modules
GLC-EX-SMD with DOM support • For information about SFP modules, see your SFP module documentation and the “Installing and Removing SFP Modules” section on page 2-20. For cable specifications, see Appendix B, “SFP Module Cables.” Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 14: Sfp Module Patch Cable
The alarm is generated when the current stops. Closed means that no current flows through the contact (referred to as a normally open contact). The • alarm is generated when the current flows. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 15: Alarm Input
The USB console interface speeds are the same as the RJ-45 console interface speeds. To use the USB console port, you must install the Cisco Windows USB device driver on the device that is connected to the USB console port (device running with Microsoft Windows). -
Page 16: Leds
13 Express Setup button IN2 (alarm input 2) 14 Ethernet ports 15 SFP module port IN3 (alarm input 3) IN4 (alarm input 4) 16 10/100/1000 port 1. Only on the Cisco IE-3010-16S-8PC switch. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 17: System Led
Alarm Input LEDs Color System Status No alarm Amber Minor alarm Major alarm Blinking red Critical alarm Table 1-6 Alarm Output LED Color System Status Green No alarm Relay closed, alarm present Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 18: Console Leds
Port is blocked by Spanning Tree Protocol (STP) and is not forwarding data. After a port is reconfigured, the port LED is amber for up to 30 seconds as STP searches for loops. Cisco IE 3010 Switch Hardware Installation Guide 1-10 78-19581-01... -
Page 19: Poe Led
Figure 1-1 Figure 1-2. The switch stores the Cisco IOS software images and the switch configuration on the card. You should not remove the card unless you want to use it in a replacement switch. You then do not have to reconfigure the new switch. -
Page 20: Power-Supply Side
C i sco I E 301 0 Sw i t ch Ser i es PSU OK LED For a description of the PSU OK LED, see Table 1-4 on page 1-9. Cisco IE 3010 Switch Hardware Installation Guide 1-12 78-19581-01... -
Page 21: Power-Supply Side Leds
14 10/100/1000 port IN3 (alarm input 3) 15 SFP port IN4 (alarm input 4) 1. Only on the Cisco IE-3010-16S-8PC switch. For a description of the LEDs, see the “LEDs” section on page 1-8. Cisco IE 3010 Switch Hardware Installation Guide... -
Page 22: Power Supply Features
SNMP application for information. Network Configurations See the switch software configuration guide on Cisco.com for an explanation of network configuration concepts. The software configuration guide also provides network configuration examples for creating dedicated network segments that are interconnected through Ethernet connections. -
Page 23: Switch Installation
• Warnings These warnings are translated into several languages in the Regulatory Compliance and Safety Information for the Cisco IE 3010 Switch document that ships on the documentation CD. These warning statements apply to all the switches: Warning Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). -
Page 24: Chapter 2 Switch Installation
4 minimum enclosure rating standards. Statement 1063 Installation of the equipment must comply with local and national electrical codes. Statement 1074 Warning For U.S. installations, refer to national electrical code ANSI/NFPA 70. Note Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 25: Installation Guidelines
POST, the System LED turns green. The other LEDs turn off and return to their operating status. If the switch fails POST, the System LED is amber. Contact Cisco Systems immediately if your switch fails POST. Note After a successful POST, disconnect the power from the switch. For more information, see Chapter 3, “Power Supply Installation.”... -
Page 26: Installing The Switch
When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. • If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in Statement 1006 the rack. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 27: Attaching Brackets For 19-Inch Racks
Figure 2-1 Attaching Brackets for 19-Inch Racks C i sc o IE 30 10 C i sc o IE 30 10 Mid-mounting position Cable-side mounting position Phillips flat-head screws Power-supply-side mounting position Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 28: Attaching Brackets For 19-Inch Racks (Ip-30 Compliance)
The You need to order the kit (part number IE-3010-IP30KIT) that has the rubber plugs. Figure 2-3 shows a close-up of the rubber plug. You can install the rubber plugs in the holes as shown Figure 2-4 Figure 2-5. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 29 Use a screwdriver or pen to completely push in the rubber plugs. See Figure 2-3. Step 3 Install the brackets on both sides of the switch. See Figure 2-6 Figure 2-7. Step 4 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 30 Chapter 2 Switch Installation Installing the Switch Figure 2-4 Inserting the Rubber Plugs Rubber plug Cable-side mounting position Mid-mounting position Power-supply-side mounting position Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 31 Chapter 2 Switch Installation Installing the Switch Figure 2-5 Inserting the Rubber Plugs Ci sc o CG S 25 20 Rubber plug Power-supply-side mounting position Cable-side-mounting position Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 32 Chapter 2 Switch Installation Installing the Switch Figure 2-6 Attaching Brackets for 19-Inch Racks Mid-mounting position Cable-side mounting position Phillips flat-head screws Power-supply-side mounting position Cisco IE 3010 Switch Hardware Installation Guide 2-10 78-19581-01...
- Page 33 For IP-30 compliance: If you use 23-inch brackets or ETSI brackets, you can insert the rubber plugs in Note the same holes as shown in Figure 2-4 Figure 2-5 before installing the brackets. Cisco IE 3010 Switch Hardware Installation Guide 2-11 78-19581-01...
-
Page 34: Attaching Brackets For 23-Inch Racks
Cable-side-mounting position For IP-30 compliance: If you use 23-inch brackets, you can insert the rubber plugs in the same holes as Note shown in Figure 2-4 Figure 2-5 before installing the brackets. Cisco IE 3010 Switch Hardware Installation Guide 2-12 78-19581-01... -
Page 35: Attaching Brackets For Etsi Racks
Cable-side-mounting position For IP-30 compliance: If you use ETSI brackets, you can insert the rubber plugs in the same holes as Note shown in Figure 2-4 Figure 2-5 before installing the brackets. Cisco IE 3010 Switch Hardware Installation Guide 2-13 78-19581-01... -
Page 36: Rack Mounting
30 10 C i sco I E 301 0 Sw i t ch Ser i es Mid-mounting position Phillips machine screws Cable screw Power-supply-side mounting position Cable-side mounting position Cable guide Cisco IE 3010 Switch Hardware Installation Guide 2-14 78-19581-01... -
Page 37: Wall-Mounting
- Port side 3.0 in. (7.62 cm) - Power supply side: 5.25 in. (13.33 cm) - Cover side (side not facing wall): 1.75 in. (4.44 cm) - Base side (facing wall): 0 in. (0 cm) Cisco IE 3010 Switch Hardware Installation Guide 2-15 78-19581-01... -
Page 38: Attaching Brackets
Step 2 Use a screwdriver or pen to completely push in the rubber plugs. See Figure 2-3. Install the brackets on both sides of the switch. See Figure 2-13. Step 3 Cisco IE 3010 Switch Hardware Installation Guide 2-16 78-19581-01... - Page 39 Chapter 2 Switch Installation Installing the Switch Figure 2-12 Inserting the Rubber Plugs in the Switch Holes Rubber plug Figure 2-13 Attaching 19-inch-rack Brackets Phillips truss-head screws Cisco IE 3010 Switch Hardware Installation Guide 2-17 78-19581-01...
-
Page 40: Wall-Mounting
Statement 378 Mount the switch with the side panel facing up. The Cisco logo should be at the top of the switch. See Figure 2-14 Figure 2-15. - Page 41 For configuration instructions about using the CLI setup program, go to Appendix C, “Configuring • the Switch with the CLI Setup Program.” Connect the switch ports. See the “Connecting Devices to the Ethernet Ports” section on page 2-25. • Cisco IE 3010 Switch Hardware Installation Guide 2-19 78-19581-01...
-
Page 42: Installing And Removing Sfp Modules
Do not remove the dust plugs from the fiber-optic SFP module port or the rubber caps from the Caution fiber-optic cable until you are ready to connect the cable. The plugs and caps protect the SFP module ports and cables from contamination and ambient light. Cisco IE 3010 Switch Hardware Installation Guide 2-20 78-19581-01... -
Page 43: Removing Sfp Modules
Insert the SFP module patch cable in the slot until you feel the connector on the cable snap into place at Step 2 the rear of the slot (see Figure 2-18). Cisco IE 3010 Switch Hardware Installation Guide 2-21 78-19581-01... -
Page 44: Removing The Sfp Module Patch Cable
C i sc o IE 30 10 Removing the SFP Module Patch Cable To remove an SFP module patch cable from the SFP module slot, release the connector, and pull it from the slot. Cisco IE 3010 Switch Hardware Installation Guide 2-22 78-19581-01... -
Page 45: Replacing The Sd Flash Memory Card
2-20. Figure 2-20 Loosening the Captive Screw Pull the cover open, and pull the cover tab from the hinge. See Figure 2-21. Step 3 Figure 2-21 Removing the SD Slot Cover Cisco IE 3010 Switch Hardware Installation Guide 2-23 78-19581-01... - Page 46 Place the SD slot cover tabs into the hinge. Step 6 Close the cover, and use a ratcheting torque number-1 Phillips screwdriver to torque the screw to Step 7 4.5 in-lb. Cisco IE 3010 Switch Hardware Installation Guide 2-24 78-19581-01...
-
Page 47: Connecting Devices To The Ethernet Ports
10/100/1000 Ethernet port, regardless of the type of connected device. See the switch software configuration guide or the switch command reference on Cisco.com for more information about autonegotiation and auto-MDIX. If auto-MDIX is disabled, use the guidelines in... -
Page 48: Connecting To The 10/100 Poe Ports
“PoE Ports” section on page 1-3 for information on the cables and connectors. The ports provide PoE support for devices compliant with IEEE 802.3af and also provide Cisco prestandard PoE support for Cisco IP Phones and Cisco Aironet Access Points. -
Page 49: Where To Go Next
Where to Go Next You can use the default configuration or use any of the management options described in the “Management Options” section on page 1-14 to change the switch settings. Cisco IE 3010 Switch Hardware Installation Guide 2-27 78-19581-01... - Page 50 Chapter 2 Switch Installation Where to Go Next Cisco IE 3010 Switch Hardware Installation Guide 2-28 78-19581-01...
-
Page 51: Power-Supply Modules
The power-supply modules are field-replaceable units (FRUs) and are hot-swappable. For translations of the safety warnings in this chapter, see the Regulatory Compliance and Safety Information for the Cisco IE 3010 Switch on the documentation CD and also on Cisco.com. Power-Supply Modules, page 3-1 •... -
Page 52: Chapter 3 Power Supply Installation
PSU OK LED Figure 3-2 PWR-RGD-LOW-DC/IA Power-Supply Module Power-supply module Captive screw PSU OK LED For a description of the PSU OK LEDs, see the “Power-Supply Module LEDs” section on page 1-9. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 53: Power-Supply Module Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Warning Statement 1030 Do not work on the system or connect or disconnect cables during periods of lightning activity. Warning Statement 1001 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 54: Installing A Power-Supply Module
UL- and CSA-rated style 1007 or 1569 twisted-pair copper wire (such as Belden part number 9318) • Wire-stripping tools for stripping 6-, 10-, 12-, 14-, and 16-gauge wires. • Number-2 Phillips screwdriver • Flat-blade screwdriver • Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 55: Grounding The Switch
0.5 in. (12.7 mm) ± 0.02 in. (0.5 mm) Wire lead Insulation Step 3 Insert the ground wire into the terminal lug, and crimp the terminal to the wire. (see Figure 3-4). Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 56 Use a ratcheting torque screwdriver to tighten the ground screws to 30 in-lb (± 2 in-lb). Step 5 Attach the other end of the ground wire to a grounded bare metal surface, such as a ground bus or a Step 6 grounded bare rack. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
-
Page 57: Installing The Power-Supply Module In The Switch
Sw i tch 250 0 Ser i es Insert the power-supply module into the slot, and gently push it in. See Figure 3-8. The power-supply Step 3 module should be flush with the switch. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 58: Wiring The Power Source
Do not connect the switch to a power source that has an ON/OFF switch. Note Use a Phillips screwdriver to loosen the captive screw on the power-input terminal, and open the cover. Step 2 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 59 ~, 50 -6 0H z, 2A C is c o C G S 2 5 2 0 10 A 10 A The terminal screws labels are on the power-input terminal cover. See Figure 3-10. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 60 Strip each of the two wires to 0.25 inch (6.3 mm) ± 0.02 inch (0.5 mm). Do not strip more than 0.27 inch (6.8 mm) of insulation from the wire. Stripping more than the recommended amount of wire can leave exposed wire from the connector after installation. Cisco IE 3010 Switch Hardware Installation Guide 3-10 78-19581-01...
- Page 61 Connect the line wire into the terminal screw labeled L and the neutral wire into the terminal screw labeled N. Make sure that you cannot see any wire lead. Only wire with insulation should extend from the terminal screw. Cisco IE 3010 Switch Hardware Installation Guide 3-11 78-19581-01...
- Page 62 DC power-supply module, connect the wires to the terminals labeled Hi. Figure 3-14 Connecting the Wires to the Low-Voltage DC Power (PSU2) C is c o IE 3 0 1 0 3 0 1 Cisco IE 3010 Switch Hardware Installation Guide 3-12 78-19581-01...
-
Page 63: Removing The Power-Supply Module
Use a Phillips screwdriver to loosen the captive screws that secure the power-supply module to the switch. See Figure 3-15. Hot surface. Statement 1079 Warning Figure 3-15 Removing the Screws C i sco I E 301 0 Sw i t ch Ser i es Cisco IE 3010 Switch Hardware Installation Guide 3-13 78-19581-01... - Page 64 To prevent exposure to hazardous voltages and to contain electromagnetic interference (EMI), either a Caution power-supply module or a blank cover must be in each power-supply module slot at all times. You can order the blank cover (part number RPS-CG-COVER=). Cisco IE 3010 Switch Hardware Installation Guide 3-14 78-19581-01...
-
Page 65: Chapter 4 Troubleshooting
You can also get statistics from the device manager, the CLI, or an SNMP workstation. See the software configuration guide, the switch command reference guide on Cisco.com, or the documentation that came with your SNMP application for details. Switch POST Results See the “Verifying Switch Operation”... -
Page 66: Switch Leds
Verify that you are using the correct cable type. See Appendix B, “Connector and Cable • Specifications” for information. Look for loose connections. Sometimes a cable appears to be seated but is not. Disconnect the cable, • and then reconnect it. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 67: 10/100 And 10/100/1000 Port Connections
Cisco prestandard IP Phones, and wireless access points, or IEEE 802.3af-compliant devices. SFP Module Use only Cisco SFP modules. Each Cisco module has an internal serial EEPROM that is encoded with security information. This encoding verifies that the module meets the requirements for the switch. -
Page 68: Spanning Tree Loops
You can enable UniDirectional Link Detection (UDLD) on the switch to help identify unidirectional link problems. For information about enabling UDLD on the switch, see the “Understanding UDLD” section in the switch software configuration guide on Cisco.com. Switch Performance Speed, Duplex, and Autonegotiation Port statistics that show a large amount of alignment errors, frame check sequence (FCS), or late-collisions errors, might mean a speed or duplex mismatch. -
Page 69: Resetting The Switch To The Factory Default Settings
Appendix C, “Configuring the Switch with the CLI Setup Program.” Finding the Switch Serial Number If you contact Cisco Technical Assistance, you need to know the switch serial number. Figure 4-1 Figure 4-2 show the serial number locations. You can also use the show version privileged EXEC command to see the switch serial number. - Page 70 Chapter 4 Troubleshooting Finding the Switch Serial Number Figure 4-2 Serial Number Location for the Power-Supply Modules SN: XXXNNNNXXXX Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
-
Page 71: Appendix
1. The maximum operating temperature of the switch varies depending on the type of SFP module that you use. See Table 1-2 on page 1-5 for information on the supported temperature ranges for the SFPs. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 72 Appendix A Technical Specifications Switch Specifications Table A-2 Technical Specifications for the Cisco IE 3010-16S-8PC Switch Power Requirements Nominal input voltage PWR-RGD-AC-DC/IA: 100 to 240 VAC, 50 to 60 Hz 100 to 250 VDC PWR-RGD-LOW-DC/IA: 24 to 60 VDC Absolute maximum (short term) input voltage...
-
Page 73: Appendix A Technical Specification
Appendix A Technical Specifications Switch Specifications Table A-2 Technical Specifications for the Cisco IE 3010-16S-8PC Switch (continued) Power consumption with two DC: 127 BTUs per hour PWR-RGD-LOW-DC/IA power-supply modules 37.1 W Power rating: 0.037 KVA@24 VDC Power consumption with two... -
Page 74: Power-Supply Module Specifications
Nominal input voltage 24 to 60 VDC Absolute maximum (short term) input voltage 18 to 75 VDC Input current 12 to 2.5 A, 18 to 75 VDC Total input BTU 737 BTUs per hour Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 75: Alarm Ratings
Alarm input electrical specification 8 V @ 1mA Alarm output electrical specification 30 V @ 1A The alarm output does not support AC Note voltage because the RJ-45 connector pin spacing is too small. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 76 Appendix A Technical Specifications Alarm Ratings Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
-
Page 77: Appendix
These ports have the send (TD) and receive (RD) signals internally crossed so that a twisted-pair straight-through cable and adapter can be attached. Figure B-1 10/100 Port Pinouts Label 4 5 6 7 8 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 78: A P P E N D I X B Connector And Cable Specifications
Figure B-2 Fiber-Optic SFP Module LC Connector Warning Invisible laser radiation may be emitted from disconnected fibers or connectors. Do not stare into beams or view directly with optical instruments. Statement 1051 Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 79: Dual-Purpose Ports
Alarm Port Pinouts Alarm connection 4 5 6 7 8 Alarm 1 input Alarm 2 input Normally closed Alarm 3 input Alarm 4 input Normally open Alarm output common Alarm input common Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 80: Cables And Adapters
— 32,810 feet (10 km) (GLC-FE-100LX) 100BASE-BX 1310 TX G.652 — 32,810 feet (10 km) (GLC-FE-100BX-D 1550 RX GLC-FE-100BX-U) 100BASE-FX 1310 50/125 6,562 feet (2 km) (GLC-FE-100FX) 62.5/125 6,562 feet (2 km) Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 81 When the fiber-optic cable span is less than 15.43 miles (25 km), insert a 5-decibel (dB) or 10-dB inline Note optical attenuator between the fiber-optic cable plant and the receiving port on the 1000BASE-ZX SFP module. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
-
Page 82: Cable Pinouts
1 TP0+ 1 TP0+ 2 TP0- 2 TP0- 3 TP1+ 3 TP1+ 6 TP1- 6 TP1- 4 TP2+ 4 TP2+ 5 TP2- 5 TP2- 7 TP3+ 7 TP3+ 8 TP3- 8 TP3- Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 83: Console Port Adapter Pinouts
RJ-45-to-DB-25 female DTE adapter, and the console device. The RJ-45-to-DB-25 female DTE adapter is not supplied with the switch. You can order this adapter from Note Cisco (part number ACS-DSBUASYN=). Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 84 Appendix B Connector and Cable Specifications Cables and Adapters Table B-3 Console Port Signaling Using a DB-25 Adapter Switch Console RJ-45-to-DB-25 Console Port (DTE) Adapter Device Signal DB-25 Pin Signal Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
-
Page 85: Appendix
Chapter 2, “Switch Installation,” Chapter 3, “Power Supply Installation.” Accessing the CLI Through the Console Port You can enter Cisco IOS commands and parameters through the CLI. Use one of these options to access the CLI: RJ-45 Console Port •... -
Page 86: Appendix C Configuring The Switch With The Cli Setup Program
Step 4 The PC or terminal displays the bootloader sequence. Press Enter to display the setup prompt. Follow Step 5 the steps in the “Completing the Setup Program” section on page C-7. Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... -
Page 87: Usb Console Port
Choose Start > Control Panel > Systems Click the Hardware tab and choose Device Manager. Expand the Ports section. The assigned COM port appears in parenthesis at the end of the line with this entry: Cisco USB System Management Console. -
Page 88: Installing The Cisco Microsoft Windows Usb Device Drivers
Installing the Cisco Microsoft Windows XP USB Driver Step 1 Obtain the file Cisco_usbconsole_driver.zip from Cisco.com, and unzip it. You can download the driver file from the Cisco.com software download site. Note Step 2 If using 32-bit Windows XP, double-click the setup.exe file in the Windows_32 folder. If using 64-bit Windows XP, double-click the setup(x64).exe file in the Windows_64 folder. -
Page 89: Installing The Cisco Microsoft Windows Vista Usb Driver
Obtain the file Cisco_usbconsole_driver.zip from Cisco.com, and unzip it. Note You can download the driver file from the Cisco.com software download site. Step 2 If using 32-bit Windows Vista, double-click the setup.exe file in the Windows_32 folder. If using 64-bit Windows Vista, double-click the setup(x64).exe file in the Windows_64 folder. -
Page 90: Uninstalling The Cisco Microsoft Windows Vista Usb Driver
Step 1 Run setup.exe for Windows 32-bit or setup(x64).exe for Windows-64-bit. Click Next. Step 2 The InstallShield Wizard for Cisco Virtual Com appears. Click Next. Step 3 When the Program Maintenance window appears, select the Remove radio button. Click Next. -
Page 91: Entering The Initial Configuration Information
The secret password is encrypted, and the enable password is in plain text. Enter enable secret: secret_password Step 4 Enter an enable password, and press Return. Enter enable password: enable_password Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01... - Page 92 5 $1$Ulq8$DlA/OiaEbl90WcBPd9cOn1 enable password enable_password line vty 0 15 password terminal-password no snmp-server no ip routing interface Vlan1 no shutdown ip address 10.4.120.106 255.0.0.0 interface FastEthernet1/0/1 interface FastEthernet1/0/2 interface FastEthernet1/0/3 ...<output abbreviated> Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 93 After you complete the setup program, the switch can run the default configuration that you created. To change this configuration or to perform other management tasks, enter commands at the Switch> prompt Cisco IE 3010 Switch Hardware Installation Guide 78-19581-01...
- Page 94 Appendix C Configuring the Switch with the CLI Setup Program Entering the Initial Configuration Information Cisco IE 3010 Switch Hardware Installation Guide C-10 78-19581-01...
-
Page 95: I N D E X
See CLI connecting cable guide, attaching 2-15 10/100 and 10/100/1000 ports 2-25 cable lengths 10/100 PoE ports 2-26 to AC and DC power 3-13 to console port connection procedures 2-25 to 2-26 Cisco IE 3010 Switch Hardware Installation Guide IN-1 78-19581-01... - Page 96 Ethernet and fiber cable troubleshooting SD Flash Memory Card 1-11 system troubleshooting with 4-1 to 4-2 lightning activity warning 2-1, 3-3 ground conductor warning link status troubleshooting ground connection warning HP OpenView 1-14 Cisco IE 3010 Switch Hardware Installation Guide IN-2 78-19581-01...
- Page 97 10/100/1000 1-11, B-3 connecting to 2-25 safety recommended cables 2-26 SD flash memory card 1-11 10/100 PoE overview 1-11 See also PoE replacing 2-23 dual-purpose serial number location LEDs 1-10 Cisco IE 3010 Switch Hardware Installation Guide IN-3 78-19581-01...
- Page 98 Telnet, and accessing the CLI 1-14 short-circuit (overcurrent) protection temperature, operating two-poled disconnect device troubleshooting wall-mounting 2-18 bad or damaged cable connection problems diagnosing problems Ethernet and fiber cables link status Cisco IE 3010 Switch Hardware Installation Guide IN-4 78-19581-01...