Debug Platform Led - Cisco Catalyst 3750 Metro Command Reference Manual

Appendix B Catalyst 3750 Metro Switch Debug Commands

debug platform led

Use the debug platform led privileged EXEC command to enable debugging of LED actions. Use the
no form of this command to disable debugging.
Syntax Description
generic
signal
Defaults Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.1(14)AX
Usage Guidelines The undebug platform led command is the same as the no debug platform led command.
Related Commands Command
show debugging
OL-9645-10
debug platform led {generic | signal}
no debug platform led {generic | signal}
Display LED generic action debug messages.
Display LED signal bit map debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Catalyst 3750 Metro Switch Command Reference
debug platform led
B-59