Debug Interface - Cisco IE-3000-8TC Command Reference Manual

debug interface

debug interface
Use the debug interface privileged EXEC command to enable debugging of interface-related activities.
Use the no form of this command to disable debugging.
Syntax Description interface-id
null interface-number
port-channel
port-channel-number
vlan vlan-id
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines
If you do not specify a keyword, all debug messages appear.
The undebug interface command is the same as the no debug interface command.
Related Commands Command
show debugging
show etherchannel
Cisco IE 3000 Switch Command Reference
B-12
debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
no debug interface {interface-id | null interface-number | port-channel port-channel-number |
vlan vlan-id}
Display debug messages for the specified physical port, identified by switch
or module number/port, for example gigabitethernet 1/2.
Display debug messages for null interfaces.
Display debug messages for the specified EtherChannel port-channel
interface. The port-channel-number range is 1 to 6.
Display debug messages for the specified VLAN. The vlan-id range is 1 to
4094.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays EtherChannel information for the channel.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01