Debug Mvrdbg - Cisco IE-3000-8TC Command Reference Manual

debug mvrdbg

debug mvrdbg
Use the debug mvrdbg privileged EXEC command to enable debugging of Multicast VLAN
Registration (MVR). Use the no form of this command to disable debugging.
Syntax Description
all
events
igmpsn
management
ports
Defaults
Debugging is disabled.
Command Modes
Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines
The undebug mvrdbg command is the same as the no debug mvrdbg command.
Related Commands Command
show debugging
show mvr
Cisco IE 3000 Switch Command Reference
B-22
debug mvrdbg {all | events | igmpsn | management | ports}
no debug mvrdbg {all | events | igmpsn | management | ports}
Display all MVR activity debug messages.
Display MVR event-handling debug messages.
Display MVR Internet Group Management Protocol (IGMP) snooping-activity
debug messages.
Display MVR management-activity debug messages.
Display MVR port debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays the current MVR configuration.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01