Debug Pm - Cisco IE-3000-8TC Command Reference Manual

debug pm

debug pm
Use the debug pm privileged EXEC command to enable debugging of port manager (PM) activity. The
port manager is a state machine that controls all the logical and physical interfaces. All features, such as
VLANs, UniDirectional Link Detection (UDLD), and so forth, work with the port manager to provide
switch functions. Use the no form of this command to disable debugging.
Syntax Description all
assert
card
etherchnl
hatable
messages
port
redundancy
registry
sm
span
split
vlan
vp
Though visible in the command-line help strings, the scp and pvlan keywords are not supported.
Note
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Cisco IE 3000 Switch Command Reference
B-54
debug pm {all | assert | card | etherchnl | hatable | messages | port | redundancy | registry | sm
| span | split | vlan | vp}
no debug pm {all | assert | card | etherchnl | hatable | messages | port | redundancy | registry |
sm | span | split | vlan | vp}
Display all PM debug messages.
Display assert debug messages.
Display line-card related-events debug messages.
Display EtherChannel related-events debug messages.
Display Host Access Table events debug messages.
Display PM debug messages.
Display port related-events debug messages.
Display redundancy debug messages.
Display PM registry invocation debug messages.
Display state-machine related-events debug messages.
Display spanning-tree related-events debug messages.
Display split-processor debug messages.
Display VLAN related-events debug messages.
Display virtual port related-events debug messages.
Modification
This command was introduced.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01