Show Setup Express - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands

show setup express

Use the show setup express privileged EXEC command to display if Express Setup mode is active on
the switch.
Syntax Description | begin
| exclude
| include
expression
Defaults No default is defined.
Command Modes
Privileged EXEC
Command History Release
12.2(44)EX
Examples This is an example of output from the show setup express command:
Switch# show setup express
express setup mode is active
Related Commands Command
setup express
OL-13019-01
show setup express [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Enables Express Setup mode.
Cisco IE 3000 Switch Command Reference
show setup express
2-463