Debug Platform Snmp - Cisco IE-3000-8TC Command Reference Manual

debug platform snmp

debug platform snmp
Use the debug platform snmp privileged EXEC command to enable debugging of the
platform-dependent Simple Network Management Protocol (SNMP) software. Use the no form of this
command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines
The undebug platform snmp command is the same as the no debug platform snmp command.
Related Commands Command
show debugging
Cisco IE 3000 Switch Command Reference
B-46
debug platform snmp
no debug platform snmp
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01