Mls Qos Srr-Queue Input Buffers - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands

mls qos srr-queue input buffers

Use the mls qos srr-queue input buffers global configuration command to allocate the buffers between
the ingress queues. Use the no form of this command to return to the default setting.
Syntax Description
percentage1
percentage2
Defaults
Ninety percent of the buffers is allocated to queue 1, and 10 percent of the buffers is allocated to queue 2.
Command Modes Global configuration
Command History Release
12.2(44)EX
Usage Guidelines You should allocate the buffers so that the queues can handle any incoming bursty traffic.
Examples This example shows how to allocate 60 percent of the buffer space to ingress queue 1 and 40 percent of
the buffer space to ingress queue 2:
Switch(config)# mls qos srr-queue input buffers 60 40
You can verify your settings by entering the show mls qos interface [interface-id] buffers or the show
mls qos input-queue privileged EXEC command.
OL-13019-01
mls qos srr-queue input buffers percentage1 percentage2
no mls qos srr-queue input buffers
Percentage of buffers allocated to ingress queues 1 and 2. The range is 0 to
100. Separate each value with a space.
Modification
This command was introduced.
mls qos srr-queue input buffers
Cisco IE 3000 Switch Command Reference
2-233