Cisco IE-3000-8TC Command Reference Manual page 296

police aggregate
Switch(config-pmap)# class class3
Switch(config-pmap-c)# trust dscp
Switch(config-pmap-c)# police aggregate agg_policer2
Switch(config-pmap-c)# exit
You can verify your settings by entering the show mls qos aggregate-policer privileged EXEC
command.
Related Commands Command
mls qos aggregate-policer
show mls qos aggregate-policer
Cisco IE 3000 Switch Command Reference
2-270
Chapter 2
Description
Defines policer parameters, which can be shared by multiple
classes within a policy map.
Displays the quality of service (QoS) aggregate policer
configuration.
IE 3000 Switch Cisco IOS Commands
OL-13019-01