Appendix; Ie 3000 Switch Debug Commands - Cisco IE-3000-8TC Command Reference Manual

Command reference

Hide thumbs Also See for IE-3000-8TC:

Table of Contents

A P P E N D I X

This appendix describes the debug privileged EXEC commands that have been created or changed for

use with the IE 3000 switch. These commands are helpful in diagnosing and resolving internetworking

problems and should be enabled only under the guidance of Cisco technical support staff.

Because debugging output is assigned high priority in the CPU process, it can render the system

unusable. For this reason, use the debug commands only to troubleshoot specific problems or during

troubleshooting sessions with Cisco technical support staff. It is best to use the debug commands during

periods of lower network traffic and fewer users. Debugging during these periods decreases the

likelihood that increased debug command processing overhead will affect system use.

Cisco IE 3000 Switch Command Reference