Cisco IE-3000-8TC Command Reference Manual page 51

Chapter 2 IE 3000 Switch Cisco IOS Commands
Examples This example shows how to enable auto-QoS and to trust the QoS labels received in incoming packets
when the switch or router connected to the port is a trusted device:
Switch(config)# interface gigabitethernet1/1
Switch(config-if)# auto qos voip trust
You can verify your settings by entering the show auto qos interface interface-id privileged EXEC
command.
Related Commands Command
debug auto qos
mls qos cos
mls qos map
| dscp-cos dscp-list to cos}
mls qos queue-set output buffers
mls qos srr-queue input bandwidth
mls qos srr-queue input buffers
mls qos srr-queue input cos-map
mls qos srr-queue input dscp-map
mls qos srr-queue input
priority-queue
mls qos srr-queue output cos-map
mls qos srr-queue output dscp-map
mls qos trust
queue-set
show auto qos
show mls qos interface
srr-queue bandwidth shape
srr-queue bandwidth share
OL-13019-01
{cos-dscp dscp1 ... dscp8
Description
Enables debugging of the auto-QoS feature.
Defines the default CoS value of a port or assigns the default
CoS to all incoming packets on the port.
Defines the CoS-to-DSCP map or the DSCP-to-CoS map.
Allocates buffers to a queue-set.
Assigns shaped round robin (SRR) weights to an ingress
queue.
Allocates the buffers between the ingress queues.
Maps CoS values to an ingress queue or maps CoS values to
a queue and to a threshold ID.
Maps DSCP values to an ingress queue or maps DSCP values
to a queue and to a threshold ID.
Configures the ingress priority queue and guarantees
bandwidth.
Maps CoS values to an egress queue or maps CoS values to
a queue and to a threshold ID.
Maps DSCP values to an egress queue or maps DSCP values
to a queue and to a threshold ID.
Configures the port trust state.
Maps a port to a queue-set.
Displays auto-QoS information.
Displays QoS information at the port level.
Assigns the shaped weights and enables bandwidth shaping
on the four egress queues mapped to a port.
Assigns the shared weights and enables bandwidth sharing
on the four egress queues mapped to a port.
Cisco IE 3000 Switch Command Reference
auto qos voip
2-25