Debug Platform Forw-Tcam - Cisco IE-3000-8TC Command Reference Manual

Appendix B IE 3000 Switch Debug Commands

debug platform forw-tcam

Use the debug platform forw-tcam privileged EXEC command to enable debugging of the forwarding
ternary content addressable memory (TCAM) manager. Use the no form of this command to disable
debugging.
Syntax Description
adjustment
allocate
audit
error
move
read
write
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines If you do not specify a keyword, all forwarding TCAM manager debug messages appear.
The undebug platform forw-tcam command is the same as the no debug platform forw-tcam
command.
Related Commands Command
show debugging
OL-13019-01
debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
no debug platform forw-tcam [adjustment | allocate | audit | error | move | read | write]
(Optional) Display TCAM manager adjustment debug messages.
(Optional) Display TCAM manager allocation debug messages.
(Optional) Display TCAM manager audit messages.
(Optional) Display TCAM manager error messages.
(Optional) Display TCAM manager move messages.
(Optional) Display TCAM manager read messages.
(Optional) Display TCAM manager write messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
debug platform forw-tcam
Cisco IE 3000 Switch Command Reference
B-31