Debug Cluster - Cisco IE-3000-8TC Command Reference Manual

debug cluster

debug cluster
Use the debug cluster privileged EXEC command to enable debugging of cluster-specific events. Use
the no form of this command to disable debugging.
Syntax Description discovery
events
extended
hsrp
http
ip [packet]
members
nat
neighbors
platform
snmp
vqpxy
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines
This command is available only on the cluster command switch.
The undebug cluster command is the same as the no debug cluster command.
Cisco IE 3000 Switch Command Reference
B-6
debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat | neighbors
| platform | snmp | vqpxy}
no debug cluster {discovery | events | extended | hsrp | http | ip [packet] | members | nat |
neighbors | platform | snmp | vqpxy}
Display cluster discovery debug messages.
Display cluster event debug messages.
Display extended discovery debug messages.
Display the Hot Standby Router Protocol (HSRP) debug messages.
Display Hypertext Transfer Protocol (HTTP) debug messages.
Display IP or transport packet debug messages.
Display cluster member debug messages.
Display Network Address Translation (NAT) debug messages.
Display cluster neighbor debug messages.
Display platform-specific cluster debug messages.
Display Simple Network Management Protocol (SNMP) debug messages.
Display VLAN Query Protocol (VQP) proxy debug messages.
Modification
This command was introduced.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01