Show Vlan - Cisco IE-3000-8TC Command Reference Manual

show vlan

show vlan
Use the show vlan user EXEC command to display the parameters for all configured VLANs or one
VLAN (if the VLAN ID or name is specified) on the switch.
Syntax Description brief
id vlan-id
mtu
name vlan-name
remote-span
summary
| begin
| exclude
| include
expression
Note Though visible in the command-line help string, the ifindex, internal usage, and private-vlan keywords
are not supported.
Command Modes User EXEC
Command History Release
12.2(44)EX
Usage Guidelines In the show vlan mtu command output, the MTU_Mismatch column shows whether all the ports in the
VLAN have the same MTU. When yes appears in this column, it means that the VLAN has ports with
different MTUs, and packets that are switched from a port with a larger MTU to a port with a smaller
MTU might be dropped. If the VLAN does not have an SVI, the hyphen (-) symbol appears in the
SVI_MTU column. If the MTU-Mismatch column displays yes, the names of the port with the MinMTU
and the port with the MaxMTU appear.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Cisco IE 3000 Switch Command Reference
2-478
show vlan [brief | id vlan-id | mtu | name vlan-name | remote-span | summary] [ | {begin |
exclude | include} expression]
(Optional) Display one line for each VLAN with the VLAN name, status,
and its ports.
(Optional) Display information about a single VLAN identified by VLAN ID
number. For vlan-id, the range is 1 to 4094.
(Optional) Display a list of VLANs and the minimum and maximum
transmission unit (MTU) sizes configured on ports in the VLAN.
(Optional) Display information about a single VLAN identified by VLAN
name. The VLAN name is an ASCII string from 1 to 32 characters.
(Optional) Display information about Remote SPAN (RSPAN) VLANs.
(Optional) Display VLAN summary information.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Chapter 2 IE 3000 Switch Cisco IOS Commands
OL-13019-01