Show Mac Address-Table Static - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands

show mac address-table static

Use the show mac address-table static user EXEC command to display only static MAC address table
entries.
Syntax Description address mac-address
interface interface-id
vlan vlan-id
| begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(44)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show mac address-table static command:
Switch> show mac address-table static
------------------------------------------
Vlan
----
All
All
All
All
All
All
4
6
Total Mac Addresses for this criterion: 8
OL-13019-01
show mac address-table static [address mac-address] [interface interface-id] [vlan vlan-id]
[ | {begin | exclude | include} expression]
(Optional) Specify a 48-bit MAC address; the valid format is H.H.H
(available in privileged EXEC mode only).
(Optional) Specify an interface to match; valid interfaces include physical
ports and port channels.
(Optional) Display addresses for a specific VLAN. The range is 1 to 4094.
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Mac Address Table
Mac Address Type
----------- ----
0100.0ccc.cccc STATIC
0180.c200.0000 STATIC
0100.0ccc.cccd STATIC
0180.c200.0001 STATIC
0180.c200.0004 STATIC
0180.c200.0005 STATIC
0001.0002.0004 STATIC
0001.0002.0007 STATIC
Ports
-----
CPU
CPU
CPU
CPU
CPU
CPU
Drop
Drop
Cisco IE 3000 Switch Command Reference
show mac address-table static
2-425