Debug Platform Messaging Application - Cisco IE-3000-8TC Command Reference Manual

Appendix B IE 3000 Switch Debug Commands

debug platform messaging application

Use the debug platform messaging application privileged EXEC command to enable debugging of
application messaging activity. Use the no form of this command to disable debugging.
Syntax Description all
badpak
cleanup
events
memerr
messages
usererr
Though visible in the command-line help strings, the stackchg keyword is not supported.
Note
Defaults
Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines The undebug platform messaging application command is the same as the no debug platform
messaging application command.
Related Commands Command
show debugging
OL-13019-01
debug platform messaging application {all | badpak | cleanup | events | memerr | messages |
usererr}
no debug platform messaging application {all | badpak | cleanup | events | memerr | messages
| usererr}
Display all application-messaging debug messages.
Display bad-packet debug messages.
Display clean-up debug messages.
Display event debug messages.
Display memory-error debug messages.
Display application-messaging debug messages.
Display user-error debug messages.
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
debug platform messaging application
Cisco IE 3000 Switch Command Reference
B-37