Cluster Member - Cisco IE-3000-8TC Command Reference Manual

cluster member

Examples This example shows how to add a switch as member 2 with MAC address 00E0.1E00.2222 and the
password key to a cluster. The cluster command switch adds the candidate to the cluster through
VLAN 3.
Switch(config)# cluster member 2 mac-address 00E0.1E00.2222 password key vlan 3
This example shows how to add a switch with MAC address 00E0.1E00.3333 to the cluster. This switch
does not have a password. The cluster command switch selects the next available member number and
assigns it to the switch that is joining the cluster.
Switch(config)# cluster member mac-address 00E0.1E00.3333
You can verify your settings by entering the show cluster members privileged EXEC command on the
cluster command switch.
Related Commands Command
show cluster
show cluster candidates
show cluster members
Cisco IE 3000 Switch Command Reference
2-64
Description
Displays the cluster status and a summary of the cluster to which the
switch belongs.
Displays a list of candidate switches.
Displays information about the cluster members.
Chapter 2 IE 3000 Switch Cisco IOS Commands
OL-13019-01