Link State Track - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands

link state track

Use the link state track user EXEC command to enable a link-state group. Use the no form of this
command to disable a link-state group.
Syntax Description
number
Defaults
Link-state tracking is disabled for all groups.
Command Modes Global configuration
Command History Release
12.2(44)EX
Usage Guidelines Use the link state track global configuration command to enable a link-state group.
Examples This example shows how enable link-state group 2:
Switch(config)# link state track 2
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands Command
link state track
show link state group
show running-config
OL-13019-01
link state track [number]
no link state track [number]
Modification
This command was introduced.
Description
Configures an interface as a member of a link-state group.
Displays the link-state group information.
Displays the current operating configuration. For syntax information,
select Cisco IOS Configuration Fundamentals Command Reference
for Release 12.2 > Cisco IOS File Management Commands >
Configuration File Commands.
(Optional) Specify the link-state group number. The group number can
be 1 to 2. The default is 1.
Cisco IE 3000 Switch Command Reference
link state track
2-181