Cisco IE-3000-8TC Command Reference Manual page 109

Chapter 2 IE 3000 Switch Cisco IOS Commands
If you enter the dot1x control-direction in interface configuration command to enable unidirectional
control, this appears in the show dot1x all command output:
ControlDirection
If you enter the dot1x control-direction in interface configuration command and the port cannot support
this mode due to a configuration conflict, this appears in the show dot1x all command output:
ControlDirection
Related Commands Command
show dot1x
interface-id]
OL-13019-01
= In
= In (Disabled due to port settings)
Description
[all | interface Displays control-direction port setting status for the specified
interface.
dot1x control-direction
Cisco IE 3000 Switch Command Reference
2-83