Show Cip - Cisco IE-3000-8TC Command Reference Manual

show cip

show cip
Use the show cip privileged EXEC command to display information about the Common Industrial
Protocol (CIP) subsystem.
Syntax Description connection
file
miscellaneous
object
security
session
status
| begin
| exclude
| include
expression
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show cip security command:
Switch# show cip security
State : Enabled
Password: abc123
Window: Open
Owner IP: 172.20.140.147
Window timeout: 600 seconds
Window open tick: 17
Related Commands Command
cip
Cisco IE 3000 Switch Command Reference
2-320
show cip {connection | file | miscellaneous | object | security | session | status}
[| {begin | exclude | include} expression]
Display the CIP connection information.
Display the information about the CIP file instances.
Display miscellaneous CIP system information.
Display information about specific CIP objects. These objects include assembly,
Ethernet link, identity, switch parameter, time sync, and TCP/IP objects.
Display the CIP security window status and settings.
Display the active and inactive CIP sessions.
Display the CIP status (enabled or disabled).
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Description
Enables the CIP and sets the CIP security options on the switch.
Chapter 2 IE 3000 Switch Cisco IOS Commands
OL-13019-01