Debug Port-Security - Cisco IE-3000-8TC Command Reference Manual

debug port-security

debug port-security
Use the debug port-security privileged EXEC command to enable debugging of the allocation and
states of the port security subsystem. Use the no form of this command to disable debugging.
Syntax Description
This command has no arguments or keywords.
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines The undebug port-security command is the same as the no debug port-security command.
Related Commands Command
show debugging
show port-security
Cisco IE 3000 Switch Command Reference
B-56
debug port-security
no debug port-security
Modification
This command was introduced.
Description
Displays information about the types of debugging that are enabled.
Displays port-security settings for an interface or for the switch.
Appendix B IE 3000 Switch Debug Commands
OL-13019-01