Show Ip Igmp Snooping Groups - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands
Examples This is an example of output from the show ip igmp snooping groups command without any keywords.
It displays the multicast table for the switch.
Switch# show ip igmp snooping groups
Vlan
-------------------------------------------------------------
104
104
This is an example of output from the show ip igmp snooping groups count command. It displays the
total number of multicast groups on the switch.
Switch# show ip igmp snooping groups count
Total number of multicast groups: 2
This is an example of output from the show ip igmp snooping groups dynamic command. It shows
only the entries learned by IGMP snooping.
Switch# show ip igmp snooping groups vlan 1 dynamic
Vlan
-------------------------------------------------------------
104
104
This is an example of output from the show ip igmp snooping groups vlan vlan-id ip-address
command. It shows the entries for the group with the specified IP address.
Switch# show ip igmp snooping groups vlan 104 224.1.4.2
Vlan
-------------------------------------------------------------
104
Related Commands Command
ip igmp snooping
ip igmp snooping vlan mrouter
ip igmp snooping vlan static
show ip igmp snooping
show ip igmp snooping mrouter
OL-13019-01
Group Type
224.1.4.2 igmp
224.1.4.3 igmp
Group Type
224.1.4.2 igmp
224.1.4.3 igmp
Group Type
224.1.4.2 igmp
Version Port List
v2 Gi1/1, Gi1/2
v2 Gi1/1, Gi1/2
Version Port List
v2 Gi1/1, Fa1/8
v2 Gi1/1, Fa1/8
Version Port List
v2 Gi1/1, Fa1/8
Description
Enables IGMP snooping on the switch or on a VLAN.
Configures a multicast router port.
Statically adds a Layer 2 port as a member of a multicast group.
Displays the IGMP snooping configuration of the switch or the
VLAN.
Displays IGMP snooping multicast router ports for the switch or
for the specified multicast VLAN.
Cisco IE 3000 Switch Command Reference

show ip igmp snooping groups

2-393