Cisco IE-3000-8TC Command Reference Manual page 423

Chapter 2 IE 3000 Switch Cisco IOS Commands
Examples This is an example of output from the show ip igmp snooping querier command:
Switch> show ip igmp snooping querier
Vlan
---------------------------------------------------
1
2
This is an example of output from the show ip igmp snooping querier detail command:
Switch> show ip igmp snooping querier detail
Vlan
-------------------------------------------------------------
1
Global IGMP switch querier status
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
Vlan 1:
--------------------------------------------------------
elected querier is 1.1.1.1
--------------------------------------------------------
admin state
admin version
source IP address
query-interval (sec)
max-response-time (sec)
querier-timeout (sec)
tcn query count
tcn query interval (sec)
operational state
operational version
tcn query pending count
Related Commands Command
ip igmp snooping
ip igmp snooping querier
show ip igmp snooping
OL-13019-01
IP Address IGMP Version
172.20.50.11 v3
172.20.40.20 v2
IP Address IGMP Version
1.1.1.1 v2
: Enabled
: 2
: 0.0.0.0
: 60
: 10
: 120
: 2
: 10
IGMP switch querier status
: Enabled
: 2
: 10.1.1.65
: 60
: 10
: 120
: 2
: 10
: Non-Querier
: 2
: 0
Port
Gi1/1
Router
Port
Fa1/1
on port Fa1/1
Description
Enables IGMP snooping on the switch or on a VLAN.
Enables the IGMP querier function in Layer 2 networks.
Displays IGMP snooping multicast router ports for the switch or
for the specified multicast VLAN.
Cisco IE 3000 Switch Command Reference
show ip igmp snooping querier
2-397