Show Alarm Settings - Cisco IE-3000-8TC Command Reference Manual

Chapter 2 IE 3000 Switch Cisco IOS Commands

show alarm settings

Use the show alarm settings user EXEC command to display all environmental alarm settings on the
switch.
Syntax Description | begin
| exclude
| include
expression
Command Modes User EXEC
Command History Release
12.2(44)EX
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show alarm settings command. It shows all the switch alarm
settings that are on the switch:
Switch> show alarm settings
Power Supply
Temperature-Primary
Temperature-Secondary
OL-13019-01
show alarm settings [ | {begin | exclude | include} expression]
(Optional) Display begins with the line that matches the expression.
(Optional) Display excludes lines that match the expression.
(Optional) Display includes lines that match the specified expression.
Expression in the output to use as a reference point.
Modification
This command was introduced.
Alarm
Relay
Notifies
Syslog
Alarm
Thresholds
Relay
Notifies
Syslog
Alarm
Threshold
Relay
Notifies
Syslog
Disabled
MIN
Disabled
Disabled
Enabled
MAX: 95C
MAJ
Enabled
Enabled
Disabled
Disabled
Disabled
Cisco IE 3000 Switch Command Reference
show alarm settings
MIN: -20C
2-309