Clear Dot1X - Cisco IE-3000-8TC Command Reference Manual

clear dot1x

clear dot1x
Use the clear dot1x privileged EXEC command to clear IEEE 802.1x information for the switch or for
the specified port.
Syntax Description all
interface interface-id
Defaults No default is defined.
Command Modes Privileged EXEC
Command History Release
12.2(44)EX
Usage Guidelines You can clear all the information by using the clear dot1x all command, or you can clear only the
information for the specified interface by using the clear dot1x interface interface-id command.
Examples This example shows how to clear all IEEE 8021.x information:
Switch# clear dot1x all
This example shows how to clear IEEE 8021.x information for the specified interface:
Switch# clear dot1x interface gigabithethernet1/1
You can verify that the information was deleted by entering the show dot1x privileged EXEC command.
Related Commands Command
show dot1x
Cisco IE 3000 Switch Command Reference
2-42
clear dot1x {all | interface interface-id}
Clear all IEEE 802.1x information for the switch.
Clear IEEE 802.1x information for the specified interface.
Modification
This command was introduced.
Description
Displays IEEE 802.1x statistics, administrative status, and operational
status for the switch or for the specified port.
Chapter 2 IE 3000 Switch Cisco IOS Commands
OL-13019-01