Configuring Ftp/Telnet User Local Authentication - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
[3Com-radius-cams] primary authentication 10.110.91.146 1812
[3Com-radius-cams] primary accounting 10.110.91.146 1813
[3Com-radius-cams] key authentication expert
[3Com-radius-cams] key accounting expert
[3Com-radius-cams] server-type Huawei
[3Com-radius-cams] user-name-format with-domain
[3Com-radius-cams] quit
# Associate the domain to the RADIUS scheme.
[3Com] domain cams
[3Com-isp-cams] scheme radius-scheme cams
Telnet users use usernames in the userid@cams format to log onto the network and
are to be authenticated as CAMS domain users.

2.6.2 Configuring FTP/Telnet User Local Authentication

Note:
Configuring local authentication for FTP users is similar to that for Telnet users. The
following example is based on Telnet users.
I. Network requirements
Configure the router to authenticate the login Telnet users at the local (see the following
figure).
II. Network diagram
Telnet user Telnet user
Figure 2-8 Local authentication for Telnet users
III. Configuration procedure
# Apply AAA authentication to Telnet users.
[3Com-ui-vty0-4] authentication-mode scheme
# Create a local user telnet.
[3Com] local-user telnet
[3Com-luser-telnet] service-type telnet
Chapter 2 AAA and RADIUS/HWTACACS Protocol
3Com Corporation
2-40
Internet Internet Internet Internet
Configuration