Configuring Tacacs Accounting Servers And The Related Attributes - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Table 2-35 Configure TACACS authorization servers
Configure the primary TACACS
authorization server.
Delete
authorization server.
Configure the secondary TACACS
authorization server.
Delete the secondary TACACS
authorization server.
Note:
If TACACS authentication is configured for a user without TACACS authorization
server, the user cannot log in regardless of its user type.
The primary and secondary authorization servers cannot use the same IP address.
Otherwise, the system will prompt unsuccessful configuration. The default port number
is 49.
If you execute this command repeatedly, the new settings will replace the old settings.
You can remove a server that cannot be removed otherwise, only when it is not used by
any active TCP connection for sending authorization packets.

2.4.4 Configuring TACACS Accounting Servers and the Related Attributes

I. Configuring TACACS accounting servers
Perform the following configuration in HWTACACS view.
Table 2-36 Configure TACACS accounting servers
Configure the primary TACACS
accounting server.
Delete the primary TACACS
accounting server.
Configure
TACACS accounting server.
Delete the secondary TACACS
accounting server.
Operation
the primary TACACS
Operation
the secondary
3Com Corporation
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Command
primary authorization ip-address [ port ]
undo primary authorization
secondary authorization ip-address [ port ]
undo secondary authorization
Command
primary accounting ip-address [ port ]
undo primary accounting
secondary accounting ip-address [ port ]
undo secondary accounting
2-32
Configuration