Configuring Radius Authentication/Authorization Servers - 3Com 3C13636 Configuration Manual

3Com Router 3000 Ethernet Family
Configuration Guide
Delete a RADIUS scheme.
A RADIUS scheme can be referenced by several ISP domains at the same time.
By default, the system has a RADIUS scheme named system whose attributes are all
default values.
Caution:
FTP, terminal, and SSH are not standard attribute values of the RADIUS protocol, so
you need to define them in the attribute login-service (the standard attribute 15):
login-service(50) = SSH
login-service(51) = FTP
login-service(52) = Terminal
After that, reboot the RADIUS server to validate them.

2.3.2 Configuring RADIUS Authentication/Authorization Servers

You can use the following commands to configure IP address and port number of
RADIUS authentication/authorization servers.
Perform the following configuration in RADIUS view.
Table 2-15 Configure IP address and port number of RADIUS
authentication/authorization servers
Configure IP address and port number of the
primary
server.
Restore IP address and port number of the primary
RADIUS authentication/authorization server to the
default values.
Configure IP address and port number of the
secondary RADIUS authentication/authorization
server.
Restore IP address and port number of the
secondary RADIUS authentication/authorization
server to the default values.
Operation
Operation
RADIUS authentication/authorization
3Com Corporation
Chapter 2 AAA and RADIUS/HWTACACS Protocol
Command
undo radius scheme radius-scheme-name
primary
ip-address [ port-number ]
undo
authentication
secondary
ip-address [ port-number ]
undo
authentication
2-19
Configuration
Command
authentication
primary
authentication
secondary