Displaying System Information; Menu Options Within The Ocp Display - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

CAUTION:
Many of the configuration settings available through the OCP impact the operating characteristics of
the storage system. You should not change any setting unless you understand how it will impact system
operation. For more information on the OCP settings, contact your HP-authorized service representative.
Table 25 Menu options within the OCP display
System Information
Versions
Host Port Config
(Sets Fabric or Direct
Connect)
Device Port Config
(Enables/disables device
ports)
IO Module Config
(Enables/disables
auto-bypass)
Loop Recovery Config (En-
ables/disables recoveries)
Unbypass Devices
UUID Unique Half
Debug Flags
Print Flags
Mastership Status (Displays
controller role — master or
slave)

Displaying system information

NOTE:
The purpose of this information is to assist the HP-authorized service representative when servicing
your system.
The system information displays show the system configuration, including the XCS version, the OCP
firmware and application programming interface (API) versions, and the enclosure address bus
programmable integrated circuit (PIC) configuration. You can only view, not change, this information.
Fault Management
Last Fault
Detail View
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide
Shutdown Options System Password
Restart Change Password
Power Off Clear Password
Current Password
Uninitialize System
(Set or not)
85