Drive LEDs
The following shows the drive and LED indicator lights and describes their functions.
1
Drive operation
Each drive carrier has two LEDs. The following table describes the LEDs.
Table 6: Drive LEDs
LED
Drive fault (bottom left)
Drive operation (top left)
Power Supply LED
The following shows the power supply LED indicator light and describes its function.
1 Power supply status
The following table describes the power supply LED.
Table 7: Power supply LED
LED
Power supply status
System Information Label
On the rear of the chassis, the system information label is located at the bottom left in a thin tray. The label extends out for
reference.
2
Drive fault
Status
•
Amber indicates that the drive has failed or been removed
•
LED off indicates normal drive operation
•
Solid green indicates that the drive is online and ready
•
Blinking green twice per second indicates that the drive is being initialized
•
Blinking green five times per second indicates read/write activity on the drive
Status
•
Solid green indicates that the power supply is working properly.
•
Red indicates that the power supply has failed. Replace the power supply.
•
Amber indicates the power supply is in standby mode. Press and release the power
button on the right front handle of the chassis.
•
No color (LED off) indicates unknown status. Inspect the power source and then
power on the array again. If the LED remains off, replace the power supply.
Documentation Feedback: doc-feedback-hpe-storage@hpe.com
Array Components 48