Displaying system information
NOTE:
The purpose of this information is to assist the HP-authorized service representative when servicing
your system.
The system information displays show the system configuration, including the XCS version, the OCP
firmware and application programming interface (API) versions, and the enclosure address bus
programmable integrated circuit (PIC) configuration. You can only view, not change, this information.
Displaying versions system information
When you press
•
OCP firmware version
•
Controller version
•
XCS version
NOTE:
The terms PPC, Sprite, Glue, SDC, CBIC, and Atlantis are for development purposes and have no
significance for normal operation.
NOTE:
When viewing the software or firmware version information, pressing
tree.
To display System Information:
1.
The default display alternates between the Storage System Name display and the World Wide
Name display.
Press any push-button to display the Storage System Menu Tree.
2.
Press
until the desired Versions Menu option appears, and then press
submenu items.
Shutting down the system
CAUTION:
To power off the system for more than 96 hours, use HP Command View EVA.
You can use the Shutdown System function to implement the shutdown methods listed below. These
shutdown methods are explained in
•
Shutting down the controller (see
56
EVA6400/8400 operation
, the active display is Versions. From the Versions display you can determine the:
Table
16.
Shutting the controller
displays the Versions Menu
or
down).
to move to