9. Power supply 1
1
2
5
6
Figure 25 HSV200-A/B controller—rear view
1. Dual controller interconnect
3. Unit ID
5. FC device ports
7. FC host ports
9. Power supply 1
1
2
Figure 26 HSV controller—front view
1. Battery 0
3. Blower 0
5. Operator Control Panel (OCP)
7. Unit ID
High availability features
Two interconnected controllers ensure that the failure of a controller component does not disable the
system. A single controller can fully support an entire system until the defective controller, or controller
component, is repaired. For EVA8x00 configurations with more than four disk drive enclosures, the
complete data redundancy configuration includes device loop switches on the two Loop A and two
Loop B data paths. For EVA4x00 and EVA6x00 configurations, data redundancy is accomplished
with device loop switches on the two Loop A data paths.
10
3
4
7
6
5
3
4
4
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide
10. Service connectors (not for customer use)
8
9
2. CAB (cabinet address bus)
4. Power ON
6. FC cache mirror ports
8. Power supply 0
10. Service connectors (not for customer use)
6
6
5
7
2. Battery 1 (EVA8000/8100 only)
4. Blower 1
6. Status indicators
81
Need help?
Do you have a question about the StorageWorks 6100 - Enterprise Virtual Array and is the answer not in the manual?
Questions and answers