D Non-Standard Rack Specifications; Rack Specifications; Internal Component Envelope; Eia310-D Standards - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

D Non-standard rack specifications

The appendix provides information on the requirements when installing the EVA4x00/6x00/8x00
in a non-standard rack. All the requirements must be met to ensure proper operation of the storage
system.

Rack specifications

Internal component envelope

EVA component mounting brackets require space to be mounted behind the vertical mounting rails.
Room for the mounting of the brackets includes the width of the mounting rails and needed room for
any mounting hardware, such as screws, clip nuts, etc.
the mounting space for the EVA product line. It does not show required space for additional HP
components such as servers.
Figure 72 Mounting space dimensions

EIA310-D standards

The rack must meet the Electronic Industries Association, (EIA), Standard 310-D, Cabinets, Racks and
Associated Equipment. The standard defines rack mount spacing and component dimensions specified
in U units.
Copies of the standard are available for purchase at http://www.eia.org/.
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide
Figure 72 shows the dimensions required for
173