Alphanumeric Display; Displaying The Ocp Menu Tree - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Button
Esc
Enter

Alphanumeric display

The alphanumeric display uses two LCD rows, each capable of displaying up to 20 alphanumeric
characters. By default, the alphanumeric display alternates between displaying the Storage System
Name and the World Wide Name. An active (flashing) display, an error condition message, or a
user entry (pressing a push-button) overrides the default display. When none of these conditions exist,
the default display returns after approximately 10 seconds.

Displaying the OCP menu tree

The Storage System Menu Tree lets you select information to be displayed, configuration settings to
change, or procedures to implement. To enter the menu tree, press any navigation push-button when
the default display is active.
The menu tree is organized into the following major menus:
• System Info—displays information and configuration settings.
• Fault Management—displays fault information. Information about the Fault Management menu is
included in
• Shutdown Options—initiates the procedure for shutting down the system in a logical, sequential
manner. Using the shutdown procedures maintains data integrity and avoids the possibility of
losing or corrupting data.
• System Password—create a system password to ensure that only authorized personnel can manage
the storage system using HP Command View EVA.
To enter and navigate the storage system menu tree:
1.
Press any push-button while the default display is in view. System Information becomes the active
display.
2. Press to sequence down through the menus.
Press to sequence up through the menus.
Press to select the displayed menu.
Press to return to the previous menu.
NOTE:
To exit any menu, press Esc or wait ten seconds for the OCP display to return to the default display.
Table 25 identifies all the menu options available within the OCP display.
84 Enterprise Virtual Array hardware components
Moves up through the available menus and options
Selects the displayed menu or option.
Returns to the previous menu.
Used for "No" selections and to return to the default display.
Used for "Yes" selections and to progress through menu items.
Controller fault management.
Function