Clearing A Password; Power Supplies - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Use the following procedure to change the password.
NOTE:
Changing a system password on the controller requires changing the password on any HP Command
View EVA with access to the storage system.
1.
Select a unique password of 8 to 16 characters.
2. With the default menu displayed, press
3.
to display Change Password?
Press
4. Press Enter for yes.
The default password, AAAAAAAA~~~~~~~~, is displayed.
5. Press
6.
Press to accept this character and select the next character.
7.
Repeat the process to enter the remaining password characters.
8. Press Enter to enter the password and return to the default display.

Clearing a password

Use the following procedure to remove storage system password protection.
NOTE:
Changing a system password on the controller requires changing the password on any HP Command
Vi w EVA with access to the storage system.
1. Press
2.
to display Change Password?
Press
3. Press
4.
Press to display Clear Password.
5. Press Enter to clear the password.
The Password cleared message will be displayed.

Power supplies

Two power supplies provide the necessary operating voltages to all controller enclosure components.
If one power supply fails, the remaining supply is capable of operating the enclosure.
or to select the desired character.
four times to scroll to the System Password menu.
to scroll to Clear Password.
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide
three times to display System Password.
89