1
10
3
4
Figure 11 FC drive enclosure—front and rear views
1. Drive bay 1
3. EMU
5. Blower 1
7. Blower 2
9. I/O module A
I/O modules
Two I/O modules provide the interface between the drive enclosure and the host controllers. See
Figure
12. They route data to and from the disk drives using Loop A and Loop B, the dual-loop
configuration. For redundancy, only dual-controller, dual-loop operation is supported. Each controller
is connected to both I/O modules in the drive enclosure.
54
Enterprise Virtual Array hardware components
Front
Rear
6
5
8
2
10
7
9
0112a
2. Drive bay 14
4. I/O module B
6. Power supply 1
8. Power supply 2
10. Status indicators (EMU, enclosure power, enclos-
ure fault)
Need help?
Do you have a question about the StorageWorks 6100 - Enterprise Virtual Array and is the answer not in the manual?
Questions and answers