Navigation Buttons; Controller Port Status Indicators; Navigation Button Functions - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

Indicator
Physical link to hosts estab-
lished
Virtual disks presented to
hosts
Cache Battery Assembly
Unit ID
Each port on the rear of the controller has an associated status indicator located directly above it.
Table 23 lists the port and its status description.
Table 23 Controller port status indicators
Fibre Channel host ports
Fibre Channel device ports
Fibre Channel cache mirror ports
Dual controller interconnect port
1
On copper Fibre Channel cables, the SFP is integrated into the cable connector.

Navigation buttons

The operation of the navigation buttons is determined by the current display and location in the menu
structure. Table 24
To simplify presentation and to avoid confusion, the pushbutton reference names, regardless of labels,
are left, right, top, and bottom.
Table 24 Navigation button functions
Button
When this indicator is green, there is at least one physical link between the storage
system and hosts that is active and functioning normally. When this indicator is
off, there are no links between the storage system and hosts that are active and
functioning normally.
When this indicator is green, all virtual disks that are presented to hosts are healthy
and functioning normally. When this indicator is amber, at least one virtual disk
is not functioning normally. When this indicator is off, there are no virtual disks
presented to hosts and this indicates a problem with the Vdisk on the array.
When this indicator is off, the battery assembly is charged. When this indicator
is on, the battery assembly is discharged.
Press to light the blue LED on the front and back of the controller. This indicator
comes on in response to a Locate command issued by HP Command View EVA.
Port
• Green—Normal operation
• Amber—No signal detected
•
Off—No SFP
• Green—Normal operation
• Amber—No signal detected or the controller has failed the port
•
Off—No SFP
• Green—Normal operation
• Amber—No signal detected or the controller has failed the port
•
Off—No SFP
• Green—Normal operation
• Amber—Interconnect cable not connected
defines the basic pushbutton functions when navigating the menus and options.
Moves down through the available menus and options
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide
Description
Description
1
detected or the Direct Connect OCP setting is incorrect
1
detected
1
detected
Function
83