Tru64 Unix Configuration; Requirements; Hba Configuration; Sun Solaris Configuration - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

2
Figure 78 SUN Solaris configuration
1 Network interconnection
2 Host 1
3 Host 2
4 Management server

Tru64 UNIX configuration

Requirements

• Switch zoning or controller level SSP must be used to ensure each HBA has exclusive access to
its LUNs.
• All nodes with direct connection to a disk must have the same access paths available to them.
• Single HBA server can be in the same fabric as servers with multiple HBAs.
• In the use of snapshots and snapclones, the source virtual disk and all associated snapshots and
snapclones must be presented to the single host that are zoned with the same controller. In the
case of snapclones, after the cloning process has completed and the clone becomes an ordinary
virtual disk, you may present that virtual disk as you would any other ordinary virtual disk.

HBA configuration

• Host 1 is single HBA host with Tru64.
• Host 2 is a dual HBA host.
See Figure 79.
1
5
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide
3
6
8
7
5 SAN switch 1
6 SAN switch 2
7 Controller A
8 Controller B
4
26434a
191