Linux (64-Bit) Configuration; Requirements; Hba Configuration; Linux (32-Bit) Configuration - HP StorageWorks 6100 - Enterprise Virtual Array User Manual

2
Figure 82 Linux (32-bit) configuration
1 Network interconnection
2 Host 1
3 Host 2
4 Management server

Linux (64-bit) configuration

Requirements

• Switch zoning or controller level SSP must be used to ensure each single path HBA has an exclusive
path to its LUNs.
• All nodes with direct connection to a disk must have the same access paths available to them.
• Single path HBA server can be in the same fabric as servers with multiple HBAs.
• In the use of snapshots and snapclones, the source virtual disk and all associated snapshots and
snapclones must be presented to the single path hosts that are zoned with the same controller. In
the case of snapclones, after the cloning process has completed and the clone becomes an ordinary
virtual disk, you may present that virtual disk as you would any other ordinary virtual disk.
• Linux 64-bit servers can support up to14 single or dual path HBAs per server. Switch zoning and
SSP are required to isolate the LUNs presented to each HBA from each other.

HBA configuration

• Host 1 and 2 are single path HBA hosts.
• Host 3 is a dual HBA host with multi-pathing software.
1
5
HP StorageWorks 4x00/6x00/8x00 Enterprise Virtual Array user guide
3
6
8
7
5 SAN switch 1
6 SAN switch 2
7 Controller A
8 Controller
4
26434a
197