Table of Contents
Advertisement
Restore the Configuration - TFTP Server Method
To restore a configuration file, you must open a TFTP server. If necessary, use
54.
The backup file must be located in the same directory that the TFTP server resides for this procedure to work.
1. Open the web user interface for the ES7506, open the Backup and Restore page under Basic Settings.
2. Select TFTP Server for the Restore Configuration, enter the IP
address of the TFTP server, enter the Backup File Name, and
click the Restore button.
3. Click Yes to the Confirm Dialog message.
4. Click Ok to the Success Message.
Firmware Upgrade
Note: Use this section to update the ES7506 with the latest firmware. Comtrol provides the latest firmware
on the Comtrol
FTP
changes. Comtrol Technical Support suggests you use the latest firmware before installing the ES7506
at a customer site.Optionally, you can use PortVision DX to upload the latest firmware. If you need to
upload a new version of the Bootloader, you must use PortVision DX. You cannot use the web user
interface to upload the Bootloader.
Firmware Upgrade Page
System Firmware
Version
System Firmware
Date
Firmware Upgrade
Note: The system is automatically rebooted after you finish upgrading firmware. You should alert the
attached users before updating the firmware that network interruption may occur.
RocketLinx ES7506 User Guide: 2000529 Rev. F
site. Updated firmware may include new features, bug fixes, or other software
The firmware version on the ES7506.
You should check the version number after the switch reboots.
The build date of the firmware on the ES7506.
•
Local File (Windows XP) - see
•
TFTP Server (Window Server 2003 - Windows 8.1) - see
(TFTP Server)
on Page 57
Configuration Using the Web Interface
Start the TFTP Server
Upgrading Firmware (Local File)
Restore the Configuration - TFTP Server Method - 55
on Page
on Page 56
Upgrading Firmware
Advertisement
Table of Contents
