Problems With Installed Optional Accessories - Dell 5130 Color Laser User Manual

Problems with Installed Optional Accessories

If an option does not operate correctly following installation or stops working:
Turn off the printer, wait for 10 seconds, and then turn on the printer. If this does not fix the problem, unplug the
printer, and check the connection between the option and the printer.
Print the printer settings page to see if the option is listed in the Installed Options list. If the option is not listed,
reinstall it. See "Printing a Printer Settings
Ensure that the printer driver is updated with the option you want to use.
Ensure the option is selected in the printer driver you are using.
The following table lists printer's option and corrective action for related problem. If the suggested corrective action does
not correct the problem, call customer service.
Problem Action
Ensure the 550-sheet feeder is correctly connected to the printer. Reinstall the feeder. See
"Removing the 550-Sheet
550-sheet
Ensure the print media is loaded correctly. See
feeder
for more information.
Ensure the 1100-sheet feeder is correctly connected to the printer. Reinstall the feeder. See
1100-
"Removing the 1100-Sheet
sheet
Ensure the print media is loaded correctly. See
feeder
more information.
Memory Ensure the memory is securely connected to the memory connector.
Hard disk Ensure the hard disk is securely inserted to the correct slot.
Wireless
Ensure the wireless adapter is securely inserted to the correct slot.
adapter
Output
Ensure the output expander is securely inserted to the correct slot.
expander
If a problem occurs with the output expander, check the following solutions:
Compile Exit SNR ON Jam
Action
Ensure that the print media is loaded in the tray properly.
1
Does this solve your problem?
Check if the print media is deformed.
2 If deformed, change the print media to one not deformed.
Does this solve your problem?
Check if the print media is curled.
3 Uncurl the print media and then set it again.
Does this solve your problem?
Remove the print media left in the H Transport Unit.
4
Does this solve your problem?
Wipe the separator rollers in tray 1 with a cloth moistened with water.
5
Does this solve your problem?
Page."
Feeder" and "Installing a 550-Sheet
"Loading Print Media in Standard and Optional
Feeder" and "Installing a 1100-Sheet
"Loading Print Media in Standard and Optional
Feeder."
Feeder."
Yes No
The task is complete. Go to action 2.
The task is complete. Go to action 3.
The task is complete. Go to action 4.
The task is complete. Go to action 5.
The task is complete. Contact Dell.
Trays"
Trays" for