Network Connection - Dell 5130 Color Laser User Manual

Network Connection

To attach the printer to a network:
1. Ensure that the printer, computer and any other connected devices have been turned off and all cables have been
disconnected.
2. Connect the network cable or wireless adaptor.
1 Ethernet Port
2 Wireless Adapter Socket
NOTE: To use the wireless adapter, be sure to disconnect the network cable.
To connect the printer to the network, plug one end of an Ethernet cable into the Ethernet port on the back of the printer,
and the other end into a LAN drop or hub. For a wireless connection, insert the wireless adapter into the wireless adapter
socket on the back of the printer.
For a wireless connection, refer to
Print and Check the Printer Settings Page
Print the printer settings page.
When Using the Operator Panel
1. Press Menu button.
2. Ensure Report/List is highlighted, and then press
3. Printer Setting is displayed. Press
The printer settings page is printed.
4. If the IP address shows anything other than 0.0.0.0 (the factory default) or 169.254.xx.xx, the printer has an IP
address assigned and stored. Go to
When Using the Dell™ Printer Configuration Web Tool
1. Enter the IP address of your printer into the web browser.
If you do not know how to launch the Dell Printer Configuration Web Tool, see
Tool."
The Dell Printer Configuration Tool opens.
2. Select Printer Settings.
3. Click the Printer Settings Report tab.
"Installing a Wireless Adapter."
(Set) button.
"Verify the IP Settings."
(Set) button.
"Dell Printer Configuration Web