Streaks Appear On The Output; Entire Output Is Blank - Dell 5130 Color Laser User Manual

Action
The toner cartridges may be low or need to be replaced. Confirm the
amount of toner in each toner cartridge.
1 1. Check the toner level in the Status tab in the Status Monitor.
2. Replace the toner cartridges as necessary.
Does this solve your problem?
If you are using non-Dell brand toner cartridges, enable the Non-Dell
Toner option.
1. Launch the Dell Printer Configuration Web Tool by entering
your printer's IP address in your web browser. (If you do not know
how to launch the Dell Printer Configuration Web Tool, see
2 Printer Configuration Web
2. Select Printer Settings.
3. Click the Printer Maintenance tab.
4. Select Non-Dell Toner.
5. Ensure that the On check box is not selected.
Does this solve your problem?
Disable the Toner Saving Mode in the printer driver.
1. On the Advanced tab, ensure that the Toner Saving Mode check
3
box is not selected.
Does this solve your problem?
The print media surface may be uneven. Try changing the Paper Type
setting in the printer driver. For example, change the plain paper to plain
thick.
4
1. On the Paper/Output tab, change the Paper Type setting.
Does this solve your problem?
Verify that the correct print media is being used. See
Sizes." If not, use the print media recommended for the printer.
5
Does this solve your problem?
Ensure that eight yellow ribbons are correctly removed from the drum
cartridge. See "Replacing the Drum
6
ribbons.
Does this solve your problem?
Replace the drum cartridge if you have a spare.
1. Replace the drum cartridge. See
2. After you replace the drum cartridge, start Tool Box. For how to
start Tool Box, see
7 The Tool Box opens.
3. Select Chart Print from the left list.
4. Click the 4 Colors Configuration Chart button.
The 4 Colors Configuration Chart is printed.
Does this solve your problem?

Streaks appear on the output.

Tool.")
Cartridges." If not, remove the
"Replacing the Drum
"Understanding Your Printer
Yes
The task is complete.
"Dell
The task is complete.
The task is complete.
The task is complete.
"Supported Paper
The task is complete.
The task is complete.
Cartridges."
The task is complete. (The drum
Software."
cartridge you are using has
been damaged. Replace it with
a new one.)
No
Go to
action
2.
Go to
action
3.
Go to
action
4.
Go to
action
5.
Go to
action
6.
Go to
action
7.
Contact
Dell.