Dell 5130 Color Laser User Manual page 242

Ready to Print
Is close to life
Ready to Print
091-4XX
N Drum Crtrdg
Is close to life
Ready to Print
091-41X
N Drum Crtrdg
prepare
Cartridge Error
091-92N
Insert XXX Drum Crtrdg
092-651
CTD Sensor Dirty
Clean CTD Sensor
Ready to Print
093-42X
N Toner Crtrdg
Is close to life
Ready to Print
094-419
Belt Unit
prepare
Ready to Print
094-422
Belt Unit
Is close to life
Belt Error
094-910
Insert Belt Unit
Belt Unit
A drum cartridge needs to be replaced
soon.
N indicates the color of the drum
cartridge.
A drum cartridge needs to be replaced
soon.
N indicates the color of the drum
cartridge.
The X drum cartridge is either missing or
not fully inserted into the printer.
X indicates the color of the toner
cartridge.
The CTD sensor is dirty.
A toner cartridge needs to be
replaced soon.
N indicates the color of the toner
cartridge.
The belt unit needs to be replaced soon.
The belt unit needs to be replaced soon.
The belt unit is either missing or not fully
installed in the printer.
See "Replacing the Waste Toner
Replace the drum cartridge of the indicated color
soon.
Order a new consumable at the website
(www.dell.com/supplies).
See "Replacing the Drum
Prepare a new drum cartridge of the indicated
color.
Order a new consumable at the website
(www.dell.com/supplies).
See "Replacing the Drum
Insert the X drum cartridge into the correct color
slot.
If the message remains, set the X drum cartridge
again and push it in firmly.
Make sure that the X drum cartridge has been
fully installed.
See "Replacing the Drum
Clean the CTD sensor.
See "Cleaning the Conductivity Temperature
Depth (CTD) Sensor."
Replace the toner cartridge of the indicated color
soon.
Order a new consumable at the website
(www.dell.com/supplies).
See "Replacing the Toner
Prepare a new belt unit.
Order a new consumable at the website
(www.dell.com/supplies).
See "Replacing the Belt
Replace the belt unit soon.
Order a new consumable at the website
(www.dell.com/supplies).
See "Replacing the Belt
Follow the instructions in the operator panel and
make sure that the belt unit has been fully
installed.
See "Replacing the Belt
Remove the belt unit and install a new one.
Box."
Cartridges."
Cartridges."
Cartridges."
Cartridges."
Unit."
Unit."
Unit."