Print Volume - Dell 5130 Color Laser User Manual

To copy the settings to another printer, specify the IP address and password of the printer to which the settings are
copied in the IP Address text box and Password text box. Then, click the Copy the settings to the Host in the
above list button. Copying the settings is complete. The connection time-out period is 60 seconds. After that, you can
check whether the settings were copied to this page. And you need to click the Copy the settings to the Host in the
above list and reboot the machine button of the Dell Printer Configuration Web Tool in the destination printer to
verify if the settings were actually copied or not.
If the settings can be copied but printer configuration is different, the settings of only the same items are copied. Printer
settings are simultaneously copied to printer of up to 10 IP addresses.
Copy Printer Settings Report
Purpose:
To verify the histories of copying.
NOTE: The print history is cleared when you turn off the printer.

Print Volume

The Print Volume menu includes the Print Volume and Dell ColorTrack pages.
Print Volume
Purpose:
To verify the number of printed pages. This page can also be displayed by clicking Print Volume in the Left Frame.
Values:
Printer Page Count Displays the total number of pages printed since the printer was shipped from the factory.
Paper Used
Dell ColorTrack
Purpose:
To specify which users have access to color printing and to limit print volume per user.
Values:
ColorTrack Mode
No Account User
Print
ColorTrack Error
Report
No-account User
1
Password*
Re-enter No-account
1
User Password*
Displays the number of pages printed for each paper size.
Off
Internal Mode
External Mode
Specifies whether to permit the printing of data with no authentication information. To permit
the printing for non-account user, set to On.
Specifies whether to automatically print error-related information if printing using ColorTrack
results in an error.
Specifies the password to be used for non-account user using 1 to 127 alphanumeric
characters. If the password is left blank (NULL), you cannot log in to a server.
Enter the password again to confirm it.
Click Edit User Registration to display the Edit Print User Registration page.
To register a user, click Create to open the Print User Settings page.
Enables to print the data with no authentication information.
Restricts printing based on the print user information registered in
the internal server.
Restricts printing based on the print user information registered in
the external server.